Install the threaded adaptor into the outlet port of the sump pump. Once the adaptor is in place, connect the garden hose to the pump. This fitting also needs to be snug, but do not over-tighten. Carefully lower the pump back into the basin, making certain it sits level on the floor of the basin.
Can you use a garden hose on a sump pump?
Sump pumps typically have a 1-1/4″ or 1-1/2″ outlet. The size of the discharge tubing should match this; that means dont use a garden hose. Using undersized discharge tubing, even at the exterior, will force the pump to run longer each time it turns on, decreasing the life of the pump.
How do you connect a garden hose to a sump pump?
0:251:24How to Attach a Hose to a Water Pump | Flood Protection SolutionsYouTubeStart of suggested clipEnd of suggested clipThen when you attach the hose thats going to slide over the hose tail. Like. So and then you simplyMoreThen when you attach the hose thats going to slide over the hose tail. Like. So and then you simply using a screwdriver tighten up the hose clip making sure its nice and securely fitted.
Will a sump pump hose freeze?
When the line freezes, the sump pump cannot discharge water and could overheat or fail. Common Causes Sump Pump discharge lines can freeze for a number of reasons. The most common cause for discharge lines to freeze up is the discharge pipe is connected to a small hose laid across the ground.
How long of a hose can you put on a sump pump?
Using a properly sized pipe for discharge will ensure that the sump pump will perform as the manufacturer intended. Installing discharge pipe of a larger size is not a huge problem and is in fact recommended for longer runs of pipe, typically 20 feet or more.
What size of sump pump do I need?
For most average-sized homes in areas with average water tables, a 1/3 HP sump pump should be sufficient. Typically, 1/3 HP pumps can handle 7 – 10 vertical lifts from the sump pit if they have one 90-degree elbow and a horizontal pipe run between 3 feet and 25 feet.
How do you connect a garden hose to PVC pipe?
0:001:17How To Convert PVC Pipe Threads to Hose Threads - YouTubeYouTube
Should you unplug your sump pump in the winter?
Never unplug your sump pump. While you might think you dont need your sump pump over the winter months, you shouldnt unplug it entirely. If a warm front comes through, snow melts and a rainstorm hits, you might end up with a wet basement all because you forgot to plug your sump pump back in.
How deep do you need to bury a sump pump line?
Most sump pumps and basins should be installed 3 feet deep but the exact depth depends on your local soil conditions and the amount of floodwater you expect to receive. Deeper pits can collect more water but will require a more powerful pump to drain all the water before overflowing the pit.
How far can a 1/2 HP sump pump push water?
A 1/2 HP sump pump can handle 7 to 10 feet vertical lift off the sump pump, a 90-degree elbow and a horizontal pipe running between 3 and 25 feet.
How far away from the house should a sump pump drain?
20 feet A. Preferably, sump water should be discharged at least 20 feet away from the house. All water from the sump pump should be directed away from the house in such a way that it drains away from the house. It should not be directed onto your neighbors lot, into window wells or onto the septic system drain field.
Can a sump pump be too big?
Theres a saying about “bigger is better,” but with sump pumps, this is not true. Oversizing a sump pump can lead to constant cycling and premature burnout of your pump system.
Can sump pump drain into street?
Can you drain water into the street? Sump pumps should only be drained into the street in emergency situations.
Is sump pump water dirty?
The Sump Pump Is Dirty Dirt, grime and bacteria can naturally build up over time, even when the water is circulating properly. You should plan to clean the pit every six to 12 months. Remove standing water with a bucket and wet-dry vacuum.
What is the difference between PVC and CPVC?
What are the differences between CPVC and PVC? The main difference between CPVC and PVC is the range of temperatures each is capable of withstanding. CPVC can handle temperatures up to 200° Fahrenheit, while PVC peaks at 140° Fahrenheit.
How do you keep a sump pump discharge hose from freezing in the winter?
The best way to prevent a discharge line from freezing is with as much insulation as possible. To achieve this, you can try burying the line deeper underground, or try adding insulation using hay and a tarp. Give your sump pump a slight slope.